anyone who have spare one for my SPECTRUM TENDER PART?

[steven large]

hi so i got this awesome SPECTRUM bachmann g scale tender from a member so i need part for the top of this beast looking tender...

anyone have spare one..pm me or where i can get from?...any info?...thks u..

 

[Tony]

steve just cut piece of wood or plastic and stick small coal to it or small wood like you red one

Tony

 

[Rhinochugger]

Steve - you say it's a Spectrum. Is it an Anniversery 4-6-0? if so, I may be able to help.

 

[Richie]

Looks like a Bachmann K-27 tender

 

[Richie]

Give Bachmann a E mail as they may carry a spare top .
You could also build it as if the tender was nearly out of coal as not all tenders were completely full :thinking:
Does look like the tender i have on my K-27 if thats any help Steven

 

[darkdaniel100]

Give Bachmann a E mail as they may carry a spare top .
You could also build it as if the tender was nearly out of coal as not all tenders were completely full :thinking:
Does look like the tender i have on my K-27 if thats any help Steven

yea its too big for the connie, Im sure its from a K-27, No circuit board inside?

 

[steven large]

Give Bachmann a E mail as they may carry a spare top .
You could also build it as if the tender was nearly out of coal as not all tenders were completely full :thinking:
Does look like the tender i have on my K-27 if thats any help Steven

yea its too big for the connie, Im sure its from a K-27, No circuit board inside?

yes i did check inside my tender and it come with circuit board with switches for battery or track power plus speaker hole at the bottom...aslo got 2 weight lead thin blocks to built up weight... on the left and rite hand side inside the tender....

so k-27?...never heard of it?...coz im into switcher tht why so any photos of tender from k-27 and aslo hi richie..can u send me a photos of yr tender to show me if rite matches...thk u..

 

[Richie]

Give Bachmann a E mail as they may carry a spare top .
You could also build it as if the tender was nearly out of coal as not all tenders were completely full :thinking:
Does look like the tender i have on my K-27 if thats any help Steven

yea its too big for the connie, Im sure its from a K-27, No circuit board inside?

yes i did check inside my tender and it come with circuit board with switches for battery or track power plus speaker hole at the bottom...aslo got 2 weight lead thin blocks to built up weight... on the left and rite hand side inside the tender....

so k-27?...never heard of it?...coz im into switcher tht why so any photos of tender from k-27 and aslo hi richie..can u send me a photos of yr tender to show me if rite matches...thk u..

Hi Steven
My K-27 can be seen in my Avatar when i'm online , but heres another close up pic for you the only difference is mine has a Dog house on top .

 

[steven large]

b.....dy awesome!!!!......yes i have same as yr without doghouse....hw come i have no dog house i dont mind at all.......so does it ran around 5 ft curves tracks?...

 

[Richie]

b.....dy awesome!!!!......yes i have same as yr without doghouse....hw come i have no dog house i dont mind at all.......so does it ran around 5 ft curves tracks?...

The dog house only came with the #453 K-27 but you can buy them for around a tenner . Your find that the coupling is bodie mounted and will only go round 8ft curves when pulling anything .
What sort of plans do you have for it will it be used with a loco for pulling ??

 

[steven large]

b.....dy awesome!!!!......yes i have same as yr without doghouse....hw come i have no dog house i dont mind at all.......so does it ran around 5 ft curves tracks?...

The dog house only came with the #453 K-27 but you can buy them for around a tenner . Your find that the coupling is bodie mounted and will only go round 8ft curves when pulling anything .
What sort of plans do you have for it will it be used with a loco for pulling ??

ah im doing bit some weathering and aslo use metal wheels with bodgies aslo change into NICKEL ROAD PLATE on both side of the tender and aslo try to scatchbuilt a logs on the top of the load and it will PULL BY nw-2 MAD MAX.,,FOR fun....then leave the tender near the caboose office tht i scatchbuilt it....for using logs in the office to keep warm...

why not?.....it dont come with k-27...just the tender.....so here is the photos of the tender......back view....
p..s.hw much it this tender worth from retail?....mmmm......

 

[Richie]

b.....dy awesome!!!!......yes i have same as yr without doghouse....hw come i have no dog house i dont mind at all.......so does it ran around 5 ft curves tracks?...

The dog house only came with the #453 K-27 but you can buy them for around a tenner . Your find that the coupling is bodie mounted and will only go round 8ft curves when pulling anything .
What sort of plans do you have for it will it be used with a loco for pulling ??

ah im doing bit some weathering and aslo use metal wheels with bodgies aslo change into NICKEL ROAD PLATE on both side of the tender and aslo try to scatchbuilt a logs on the top of the load and it will PULL BY nw-2 MAD MAX.,,FOR fun....then leave the tender near the caboose office tht i scatchbuilt it....for using logs in the office to keep warm...

why not?.....it dont come with k-27...just the tender.....so here is the photos of the tender......back view....
p..s.hw much it this tender worth from retail?....mmmm......

Not sure how much the tender would cost but most of the spectrum wagons are over a £100 each so i would guess at between £50 - £100 . Loco and tender would now set you back around £800 new but you can pick some up between £400 - £500 .

 

[steven large]

this scatchbuilt from tony and i weathering it so tht why i used the tender to pass them and drop the logs off for the caboose office.....and then leave the tender on another side of dead end tracks............if want more logs....nw-2 will pick the tender up and go back to lumberyard to collect more logs and go back to the caboose office in case......