IP Engineering Ezee Line Rolling Stock

S

Spencer CF

Registered
Does anyone have any pics of IP Engineering Ezee Line rolling stock mixed with "regular" rolling stock, or pulled by a your average loco (not a Rapier or similar Ezee line loco). Ezee Line is 7cm wide which is narrower than your usual 10-11cm stuff.

I'm just curious if they look terribly mismatched or not.
 
Spencer CF said:
Does anyone have any pics of IP Engineering Ezee Line rolling stock mixed with "regular" rolling stock, or pulled by a your average loco (not a Rapier or similar Ezee line loco). Ezee Line is 7cm wide which is narrower than your usual 10-11cm stuff.
Click to expand...
The Ezee kits are a little smaller than Mamod stock, approx. 70mm wide and 100mm to the roof of the vans. As the name indicates, they are easy to assemble, but they are a lot smaller than the usual run of SM32 stock. Don't have any photos handy at present.

Graeme
 
Just to try and help out, I don't have any photo's because they look so mis-matched. I never ran them mixed with other stock, but kept them as a seperate generic rake which worked out OK with the smaller loco's.
 
Thanks guys. I eventually found a pic somewhere of an Ezee brake van at the end of a rake of some standard-sized stock. Ezee stuff would definitely look better as a seperate consist for a smaller loco.
 
You must log in or register to reply here.
Back
Top