LGB 10345 shuttle unit...

[Southland]

Hi,
Re: LGB shuttle unit 10345.
I'm wondering what the maximum time limit is on this unit before the current reverses. Not the dwell time at a terminating point, but the actual running time in one direction. Could I run a tram from one end to the other over 10 minutes for example.
Thanks

 

[muns]

You should be able to. You can only adjust the acceleration/deceleration rates (depending upon the mode of operation) and the waiting period.

Manual here:
Shuttle Train Automatic Circuit Box | Märklin

 

[stevedenver]

the run time is not timed.
the reversal is triggered by the train entering the isolated section of the track at each end.
once in the isolated section both deceleration , acceleration, and delay are triggered.

so yes you can run as far as you like

 

[Southland]

Thanks for the replies.