LGB motor-block connectors

DoctorM

DoctorM

Interests: Manifold
Country flag
Does anyone know where I can obtain these connectors?
motorblocklead.png

Crimp or soldered type would be equally acceptable
 
Mark (Muns on here) at Garden Rail Outlet has them, about 30p or so each from memory.....

Jon.
 
If you buy a Massoth decoder..
You get two sets, of the four, for the motor-block and the 10-way connector with wires.
 
PhilP said:
If you buy a Massoth decoder..
You get two sets, of the four, for the motor-block and the 10-way connector with wires.
Click to expand...

Didn't somebody say on here quite recently that Massoth are no longer including the 10-way DCC connector as standard with all XL/XLS decoders, you now have to buy one separately if you need it?
I assume they still include the two sets of track/motor wires as standard.

Jon.
 
Zerogee said:
Didn't somebody say on here quite recently that Massoth are no longer including the 10-way DCC connector as standard with all XL/XLS decoders, you now have to buy one separately if you need it?
I assume they still include the two sets of track/motor wires as standard.

Jon.
Click to expand...
It was me and it has been confirmed that Massoth no longer ship the 10-way connector, you have to buy it separately (about £5) or make one (about £2). They still include the yellow/white/green/brown track/motor connectors, even on the Massoth eMotion M 1.2 Amp where they are hard-wired.
 
I had the same question as DoctorM and his post prompted me to do some searching in the US. A package of 10 crimp-on connectors can be purchased from "All About LGB" (allaboutlgb.com) for $3.95 plus postage.
 
You must log in or register to reply here.
Back
Top