LGB SOUND BOARD Uintah Mallet steam engine with kettle fire/analog
- Thread starter Madman
- Start date
Neil Robinson
Registered
Yes, but you'd need a chuff trigger to make it work with the option of bell and whistle triggers.
I've installed one in a Lionel Atlantic tender for a mate following Beavercreek's topic.
http://www.gscalecentral.net/LGB-su...in-Bachmann-Annie-and-it-works-for-30-m217711 < Link To http://www.forum.gscalece...ks-for-30-m217711
Mike's last posting, about the need for eight magnets, is important. The hall sensor uses one polarity to turn on and the other to turn off. The board seems to be programmed to ignore every other pulse to give two chuffs per revolution.
I've installed one in a Lionel Atlantic tender for a mate following Beavercreek's topic.
http://www.gscalecentral.net/LGB-su...in-Bachmann-Annie-and-it-works-for-30-m217711 < Link To http://www.forum.gscalece...ks-for-30-m217711
Mike's last posting, about the need for eight magnets, is important. The hall sensor uses one polarity to turn on and the other to turn off. The board seems to be programmed to ignore every other pulse to give two chuffs per revolution.