Playmobil Parts Needed

[Madman]

I acquired a few Playmobil Items the other day and would like to resell them.  The steam loco needs a Rivet or Pin.  See photo.  There is also what might be the remnants a whistle on the roof, no photo.  The whistle itself must have broken off. 

There are two passenger cars.  One of them needs seats and the upright poles that go from the floor to the luggage racks. 

On a side note, there were four figures that came with the package.  They seem to be somewhat taller than the normal Playmobil figures. 

 

[Loco]

The figure looks like it is Play Big, not Playmobil.

 

[playmofire]

Loco is right, they are PlayBig. These figures have jointed arms and legs which is probably why they are bigger than Playmobil. They appeared after Playmobil and Playmobil took court action for copying and won.

Playmoking on ebay.de sells to the UK and has some of the parts you want.

If you want some figures, I may be able to help.

seats x 6 331076414331

pins x 2 331079468486

He has two cheaper sets of seats, but they are in poorer condition as a set. Search in his shop in personenwagen.

He has the poles for supporting the luggage racks, but he is selling them with a pair of the racks. They'll come up on the personenwagen search. If you ask, he may sell you them without the racks. The poles are a fairly rare item.

He will combine postage and I've found him a good and trustworthy seller over the years.

 

[MRail]

The loco appears to need coupling rods.
The conrods are then pinned to the coupling rods.

 

[playmofire]

The second picture suggests it has at least one coupling rod. The conrods on the Playmobil track powered locos were dummies and are expensive to get hold of - about £8 each. Those on this loco were red and I have never seen them for sale.

 

[Madman]

The rods themselves are both present and accounted for. that is both sides of the loco has their rods. It's the Pin I need to hold the rod to the wheel.

 

[playmofire]

I'll check my spares box again and see if I have one. Since I got back home this evening and read your post I've looked in it a couple of times, but I'll have a more thorough search over the weekend.

 

[sparky230]

i've used small domed self tampers to replace the pins before put a piece of tubing on top of screw to act as a bush

 

[playmofire]

The rods themselves are both present and accounted for. that is both sides of the loco has their rods. It's the Pin I need to hold the rod to the wheel.

I've checked the spares box again and I'm sorry to have to report that I have none (which is worrying as it's good to have one or two spares just in case).

 

[Madman]

I've checked the spares box again and I'm sorry to have to report that I have none (which is worrying as it's good to have one or two spares just in case).

Thanks for taking the time to check for the parts. I appreciate it.

 

[playmofire]

Dan, I've pmed you about spares.

Gordon