Wooden Station Kit

Fortkentdad

Registered
Hello - new here.

I have a small oval of track in my yard, just got started in G scale a couple of years ago.
Sometime ago we picked up a wooden station kit.
Very minimal instructions.

I've build lots of kits in N Scale but never anything that needs to stand up to the elements.
We live in northern Canada and this structure if left outside all year will need to survive our winters (down to forty below) under a couple of feet of snow.
In our short summer months we may hit 30° C (about 90 F) for a day or two.
Can these structures survive the elements or am I wise to bring it inside along with the trains. I did build a trestle which seems to be surviving. Used Tremclad paint on that one and just scrap wood I milled down to the size I wanted.

I have a box of old Garden Railway magazines somewhere will need to put my feet up and re-read these - when I find them.

Any recommended websites?

On my longer range 'should do' list for this railway is the idea of converting my Aristrocraft 0-4-0 starter engine into something unique, maybe a box cab or something whimsical. Something other than this most common of starter engines. I have one other steam engine by Bachmann.

But this year we want to add some buildings to our garden run - have managed with birdhouse buildings so far.
 
G'day, Welcome! This forum will be able to answer most of your queries. Plus making you laugh at the banter..(sense of humour is essential)

For my sins, when I migrated my railway from Uk to Australia,. I found a lot of the glues, paints etc failed due to the temp difference. So had to relearn quickly. We don't get the variations that you get, but we do quickly move between 20 and 45 degrees. Experimentation found the right materials to use. UV was never an issue in UK; here it is....

There are a number of your fellow countrymen on this forum who'll be able to give you good advice!

And, welcome again!!!
 
Welcome to the Forum from a fellow Canadian, but I'm on the other side of the pond now. If I still lived in Saskatoon (30/40 below like you) I'd take any buildings indoors during the long and windy snowy winter.
 
I live well to the east and somewhat south of you, so our winters aren't quite so harsh. However, I bring anything wooden into the shed for the winter; it may get cold, but it won't get soaked.
As for websites, have you discovered Large Scale Central, which covers North American matters (including winter and structure modelling) rather well.
 
Back
Top Bottom