Building viaducts

[Philbahn]

Found an old memory card with photos of the viaduct extension. So heres how to do or not do it.

The main part had already been cast leaving a gap

 

[Philbahn]

So off Iwent to get some MDF. This was cut and assembled using screws, to form this

 

[Philbahn]

The curves taken care of by special bendy plywood

 

[Philbahn]

This was then placed in position and filled with concrete in situ

 

[Philbahn]

That was three years ago. This is the end result now

 

[Philbahn]

Young Phil giving it a coat over looking over