Lazy Grange Bay 3...a new start

IMG_20190401_112235.jpgIMG_20190401_135548_1.jpg
 
Well, I got back to my wearhouse, it's going to be situated on a raised platform, next to the cannel and in front of the goods shed, and yes it will have a loading Dock.IMG_20190416_101224.jpgIMG_20190408_162744.jpgIMG_20190411_135412.jpgIMG_20190411_135027.jpgIMG_20190410_130609.jpgIMG_20190411_134438.jpgIMG_20190411_134832.jpgIMG_20190411_135758.jpgIMG_20190411_135738.jpgIMG_20190411_135551.jpgIMG_20190412_115336.jpgIMG_20190414_151004.jpgIMG_20190414_151016.jpgIMG_20190414_155126.jpgIMG_20190414_155158.jpgIMG_20190415_113438.jpgIMG_20190415_113451.jpgIMG_20190415_145814.jpgIMG_20190416_141834.jpgIMG_20190416_143516.jpg
 
And as of today... IMG_20190416_163313.jpgIMG_20190416_163335.jpg
 
Well with the nicer weather the office moved out doors.. And progress was made on the rear wall.. Over 80%will be hidden but we know the details are there, (and so do the voices), after a trail fit on site, all be it very loosely.. We feel confident... ISH...
Last one is of the rear, were the loading Dock will be... IMG_20190419_111152.jpgIMG_20190419_142809.jpgIMG_20190419_154527.jpgIMG_20190419_154748.jpgIMG_20190419_154826.jpgIMG_20190419_154659.jpgIMG_20190419_154737.jpgIMG_20190419_154537.jpg
 
And of course train were running while we plodded on... Jenny & rihita were out on passenger duties, all day.. Faultlessly running from 9 till 5..IMG_20190419_173942.jpgIMG_20190419_150016.jpgIMG_20190419_132420.jpgIMG_20190419_132137.jpgIMG_20190419_104248_1.jpgIMG_20190419_104149.jpg
 
Health and Safety! - Better fence-off those two manholes, just outside the main door! :eek::oops:

Why is that loco being fired with dead sheep? :eek::eek::tmi:
:giggle:
 
We is recycling dead sheep as fuel..
Green you see
Started today as assembly day.. Fingers crossed it fits.. IMG_20190421_100742.jpgIMG_20190421_104455.jpgIMG_20190421_113951.jpgIMG_20190421_114008.jpgIMG_20190421_115819.jpgIMG_20190421_115912.jpgIMG_20190421_115924.jpgIMG_20190421_123553.jpg
 
And trains ran too.. IMG_20190421_135212.jpgIMG_20190421_134914.jpgIMG_20190421_134839_1.jpgIMG_20190421_134744.jpgIMG_20190421_134655.jpgIMG_20190421_134545.jpgIMG_20190421_134442.jpg
 
38 inch x 32 inch roughly... But not square as its a triangle...
Yes but then everything is!!!
Rear wall detailing, doing the loading bay doors shut for now as there's enough to be done, to get it weather tight, so it can live out side, details like the loading Dock and its interior will be added lIMG_20190422_143215.jpg
 
Well, there is a lot still to do, adding more levels of details, jenny thought I'd gone mad and treated her to a new kitchen bin, but I use of the old bins inner plastic bucket.. As a roof surport. Needs cutting down... Started on roof.. IMG_20190421_135452_1.jpgIMG_20190424_114333.jpgIMG_20190424_114347.jpgIMG_20190425_101546.jpgIMG_20190427_130315.jpgIMG_20190427_130402.jpgIMG_20190427_152055.jpgIMG_20190427_152116_1.jpg
 
The board you are using Mike.

Can you bend it? I want to make bridge buttresses where my track curves....
 
Gizzy said:
The board you are using Mike.

Can you bend it? I want to make bridge buttresses where my track curves....
Click to expand...
Hi Gary, yes it bends, look at the viaduct, or my bridge buttresses.. Its very easy to use.. Make a internal former and glue it to itIMG_20190421_135212.jpgIMG_20190418_153534.jpg
 
Summer has I think... Landed and the Wear house is coming together. Roof is 6mm thick foamex and so is the base.. IMG_20190516_132749.jpgIMG_20190516_125414.jpgIMG_20190516_125146.jpgIMG_20190516_125043.jpgIMG_20190516_124707.jpgIMG_20190516_102740.jpgIMG_20190516_102806.jpgIMG_20190516_135710.jpgIMG_20190516_110637.jpgIMG_20190512_150019.jpg
 
So realistic, with that arch filled with the red-brick.. Didn't know the layout went that far? :think:
:p;):rofl::rofl::rofl:
 
You must log in or register to reply here.
Back
Top